Principe : To control each sterilization cycle according to parameters defined by the person in charge. To allow everybody (with the proper authorization) to pilot the recorders and to perform the analysis and the validations with speed, simplicity and safety.

Reminder : MicrologC and Microlog pressure and temperature autonomous recorders are miniaturized and can be located at the heart of the load to be sterilized. Their 32000 measurement points allow for up to 9 hours of recording with a 2 seconds acquisition rate. Their low consumption and their special batteries offer up to 1000 hours of recording (with MicrologC).

Software : Extremely user friendly, ABste Control offers the possibility to validate a load with a minimum of mouse clicks: the MicrologC is read, analysis predefined by the person in charge are performed, data is stored and a complete validation report is printed. Everything is automatic.

Configuration : The person in charge edits (under password security) the operational configuration (data directory, printer), defines the sterilizers characteristics, their cycles and the authorized operators and entirely configurate the analysis to be performed for each cycle.

Traceability : At any time, it is possible to review all analysis results ( see the log below). Each and every cycle that has been analyzed ( and thus archived) can be classified by date and time, sterilizer, type of cycle, operator, analysis or any other criteria that will allow an easy search.

The ‘‘Log’’ :

The "Log" : Click on image to see the PDF file

Printing of a complete report : Click on image to see the PDF file