Metrolog : Sterilization logger for in-situ monitoring of sterilizers and process validation

Efficience and simplicity

-The Microlog ® is placed anywhere in the product or equipment to sterilize. Its internal battery supplies its power: it thus doesn’t need any wire connection.

-Data acquisition is started automatically by plugging it, during at least 1 s, on a starter / identifier (that allows, at time of reading, to know its location).

-Recorded data are automatically read when it is placed on its reader (LMU) or its multiple reader (LMM) and it is reprogrammed at the end of the reading, automatically.

-At the end of the cycle, the data are automatically analysed and filed. After validation by an authorized operator, the analysis report is automatically printed

Microlog Breakthrough

-Measurement of sterilization, pasteurization or cooking parameters by an autonomous recorder

-Automatic start of recording thanks to a starter/identifier

-Automatic result analysis on any IBM PC compatible computer

-Automatic results filing and archiving for future reference

Microlog assets

-High accuracy of temperature and pressure measurements versus time

-Automatic and immediate reading of the data recorded by one or more µlogC

-Automatic control of sterilization quality parameters (F0, steam saturation, En554, En 285)

TYPE

µlog T	Temperature
µlog TP	Temperature and pressure

PRESSURE

PiezoResistive Sensor

Range	0 to 75 psi (0 to 5 bar)
Accuracy	±0.015 psi (0.01 bar)
Resolution	0.015 psi (0.001 bar)

TEMPERATURE

PT 100

T° max.	300°F (150°C)
Accuracy	0,3°F (0,2°C)
Resolution	0,03°F (0,02°C)

MEMORY

Capacity	32000 points
Scanning rate	from 1s to 10 h

POWER SUPPLY

Battery type	A15E
Autonomy	1000 hours

RECORDER

Recorder material	stainless steel
Dimensions	Ø65 * 40 mm

Download MicrologD_ETDS.pdf