Efficience and simplicity
-The Sterilog is placed in one of the baskets containing the load to be sterilized. Its internal battery supplies its power; and thus does it not need any wire connection. - Thanks to the pressure measurement, it allows the steam to be controlled. -Its temperature sensors can be located at the important spots of the load to be controlled, for a complete survey of the sterilizer volume. At the end of the sterilization cycle, the recorded data are read by any IBM compatible computer. -The data are automatically analyzed (for sterilization quality and compliance with EN554) and filed.
|
Sterilog Breakthrough
-Measurement of sterilization parameters by
an autonomous recorder
-Immediate reading of recorded data and
their results by any IBM compatible computer
-Automatic results filing and archiving for
future reference |
Sterilog assets decalage ligne
-High accuracy and resolution of temperature
and pressure measurements versus time
-Automatic control of sterilization quality
parameters (F0, steam saturation)
-Immediate and automatic result analysis for
compliance to EN 554 |
